Aviation Safety Inspector (AW-ACM)(PPM)
What you'd do
The Partial Program Manager (Powerplant) has primary responsibility for the adequacy of the operators maintenance, preventative maintenance, and alteration programs accomplished on POWERPLANTS off wing. The PPM (Powerplant) coordinates with the PPM. on Airworthiness Directive, compliance, Mechanical Reliability Reporting, Mechanical Interruption Summary Reporting, engine removal rates, powerplant related incidents, powerplant training programs, approval and modifications of powerplant.
Major duties
The PPM (Powerplant) is responsible for certification activities concerning repairs, alterations, and modifications developed and accomplished on powerplants off wing. When assigned by the Principal Inspector, the PPM (Powerplant) assists in the technical administration, certification, and surveillance job tasks which are the primary responsibility of the PPM (Fleet). Technical Administration Within assigned technical program, assures on a continuing basis the organizations are properly and adequately organized, staffed, and equipped, have and conduct an adequate training program, including an acceptable record keeping system: and have facilities and procedures that meet all regulatory requirements. Regularly visits the organization's stations and other offices to maintain contact with their management officials; coordinates with the Principal Inspector for correction of any deficiencies/discrepancies. Develops maintenance program requirements for engines and APUs through participation on Maintenance Review Boards. Coordinates Minimum Equipment List (MEL} for engines for approval with Principal Operations Inspector. Takes enforcement action instances of noncompliance with the MEL. Conducts enforcement investigations and prepares final reports and recommendations on disposition. Performs or supervises the emergency suspension of certificates or cancellations of operations specifications. Conducts or directs the re-examination of certificated airmen or recertification of an operator or agency. Certification Responsible for initial and ongoing certification of engines and APUs for air carriers, aircraft, and air agencies. Responsible for initial and ongoing certification of airmen. makes recommendations on the appointment of designees. Evaluates requests not previously specified in the maintenance portion of the operations specifications and approves or disapproves requests and provides additional conditions andlimitations as needed. Provides guidance to the assigned air carrier in development of required engine and APU maintenance manuals and record keeping systems. Reviews and determines adequacy of engine manuals associated with the air carrier¿s engine and APU maintenance programs and revisions thereto. Assures that manuals and revisions comply with regulatory requirements, prescribes safe practices, and furnishes clear and specific instructions governing engine and APU maintenance programs. Approves operations specifications and amendments thereto. Determines if the engine and APU maintenance facilities being established or contract arrangements entered into by air carriers for the purpose of overhaul work, major repair and alterations, and other maintenance are satisfactory. Reviews changes and negotiates with air carrier management to resolve problems. Determines if engine and APU overhaul and inspection time limitations warrant revision. Evaluates an operator's proposed engine and APU reliability programs for compliance with national policies. Advises operator of deficiencies and required changes. Approves/disapproves engine and APU reliability programs. Directs or participates in proving flight evaluations to determine compliance with the CFRs. Recommends changes that will be required prior to approval. Surveillance Directs and/or performs the inspection and surveillance of the air carrier's continuous airworthiness engine and APU maintenance program. Monitors all phases of the air carrier's engine and APU maintenance operation, including the following: engine and APU maintenance, engineering, quality control, production control, training, and reliability programs. Analyzes trends to detect a deterioration in the engine and APU maintenance program. Analyzes engine and APU reports submitted by the air carrier to ensure compliance with the maintenance program and assures the air carrier has an effective continuing analysis and surveillance program to meet the requirements of the CFRs.
What you need to qualify
Applicants must meet the Office of Personnel Management Qualification Standards: General Requirements for All Positions: Not more than two separate incidents involving Federal Aviation regulations violations in the last 5 years Valid State driver's license Fluency in the English language No chemical dependencies or drug abuse that could interfere with job performance, and High School diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation.The minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. In addition, applicants for positions that require participation in the operation of the aircraft must: Possess a valid second-class medical certificate in accordance with FAA regulations; and Pass recurrent medical examinations as prescribed by the FAA. Applicants not requiring valid second-class medical certificates who are tentatively selected will be required to: Provide documentation from a board-certified physician certifying that they meet the minimal medical requirements; or Individuals who do not meet the minimum medical requirements but who are otherwise qualified will receive an individualized assessment to determine whether they can perform the essential functions of the position. When the predominant work involves air carrier maintenance, applicants for Aviation Safety Inspector (Airworthiness) positions must meet all of the following requirements. Experience involving the maintenance and repair of airframes, power plants, and systems of multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight maintained under an airworthiness maintenance and inspection program. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state, or Federal governmental agency. Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. To qualify for this position, you must demonstrate in your application that you possess at least one year of experience equivalent to FV-I, FG/GS-13grade level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position. Specialized experience is defined as: Assisting, conducting or performing various technical functions related to certification, surveillance, investigation and compliance recommendation of maintenance activities on FAR Part 121 air carriers/air operators. Note: Recency of specialized experience is waived for employees currently in the 1825 series. Applicants should include examples of specialized experience in their work history. Qualifications must be met by the closing date of this vacancy announcement. Errors or omissions may impact your rating or may result in you not being considered for the job.
Before you apply
Federal applications are different: your resume should be 3–5 pages and mirror the language of this announcement. Read our federal resume guide first — it's the #1 reason qualified people get screened out.
Similar openings
Browse all →Supervisory Air Traffic Control Specialist, (MSS-3, Level 10), Support Manager
Aviation Safety Inspector (AC - Flight Oversight - Geographic )
Aviation Safety Inspector(GAM) ( Principal Maintenance Inspector)
Don't miss the next one.
Get an email the moment a similar federal job opens — postings can close in as little as 5 days.