Electronics Mechanic
What you'd do
This position is located at the Portland VA Medical Center (Portland and Vancouver campuses) and all associated Community Based Outpatient Clinics (CBOC's - currently there are 9), in the Electrical/Electronics shop of the Maintenance and Repair section, Facilities Management Service. The incumbent is responsible for on-site technical support, day to day coordination, and administration of the most critical, highly complex equipment at PVAMC.
Major duties
Major duties include, but are not limited to: Responsible for installation, trouble shooting, adjustment, test, repair and preventive maintenance of all portions of complete operational electronic systems and equipment down to board level primarily fire alarm systems, intrusion detection systems, access control systems, central radio system, nurse call system, alarm systems, color television sets, hospital beds, intercom systems, public address systems, photo cells, amplifiers, relay control circuits, motors, solenoid operated air, water, and steam valves, distillation processes, computer peripherals, electromechanical systems, electrical and electronic circuitry and various other related equipment. Converting theoretical ideas of engineers into practical units or electronic devices in support of a complex electrical or electronic system involving such functions as microwave communication, radio systems, or digital automated controls. Analyzing, redesigning, modifying, installing, evaluating, repairing, and performing in service training on a wide variety of complex equipment systems within the medical center. Analyze all reported malfunctions and problems, and must determine the scope, extent and severity after verification. Research, design, modify, and install systems and equipment assigned. Investigate causes for the failure by industry standard and modified techniques. Communicate with Individuals or groups from outside the agency, including consultants, contractors, vendors, or representatives of professional associations, in moderately unstructured settings. Initiates all orders for all parts or replacement boards and keep inventories up to demand levels. Utilizes the capabilities and limitations of various test equipment and measuring devices such as digital multimeters, dual trace oscilloscopes, special test panels and various others, including performance of trouble shooting techniques involving signal tracing, wave form analysis, voltage, current and resistance checks and various others. The incumbent is proficient in the planning, co-ordination, technical layout, installation and follow up of all electronic systems and provide a working knowledge of the NEC, NFPA and OSHA requirements during re-design and new construction at the Medical Center. Performs other related duties as assigned. Work Schedule: Monday - Friday, 7:00am - 3:30pm PST Position Description Title/PD#: Electronics Mechanic/PD21006A Relocation/Recruitment Incentives: Not authorized
What you need to qualify
To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 07/21/2026. EXPERIENCE: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position. Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Federal Wage System Qualification Standards. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element. The ability to do the work of an Electronics Mechanic without more than normal supervision. Examples include: Installing electronic equipment and systems; Performing preventative maintenance on electronic equipment and circuits; Converting theoretical engineering plans into practical units or electronic devices; Researching electronic systems and equipment design for installation, troubleshooting, maintenance, and repairs; Analyzing electronic systems and circuits by signal tracing, wave form analysis, voltage, current, and resistance checks. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements: Electronics Equipment Assembly, Installation, Repair Ingenuity Test Equipment - Electronics Troubleshooting Use Hand and Power Tools - Electronics Without more than normal supervision Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements/Working Conditions: Physical demands are exhaustive and require considerable lifting of heavy objects up to 65 pounds. The work requires some physical exertion, such as: long periods of standing; walking over rough, uneven, rocky, or slippery surfaces; recurring bending, crouching, stooping, stretching, climbing, or similar activities; such as testing or measuring equipment; and/or regular visits to construction, industrial, marine, or other outdoor sites. Prolonged standing in cramped positions, overhead work, climbing, bending, crawling under buildings and in attics and climbing high ladders to work on overhead systems is also required. Work assignment involves standing, climbing, bending and frequent work in cramped and awkward positions. Incumbent handles objects frequently weighing 65 pounds and may be required to lift these objects over their head, i.e., when removing or installing television sets. Incumbent must have finger dexterity to effect necessary repairs and must have good color discrimination in order to distinguish color coded wires. Work is done inside and outside, in hot and cold temperature extremes. Involves regular and recurring exposure to moderate risks and discomforts, such as the following: dust, strong odors, fumes from fuels, chemicals, or engine exhaust, high levels of noise and vibration, constantly exposed to electric shocks, contagious diseases, uncovered moving equipment and machinery. Exposed to the possibility of broken bones, cuts, and bruises. May be exposed to extremely high noise levels, exposure to radiation, chemicals, and carcinogens.
Before you apply
Federal applications are different: your resume should be 3–5 pages and mirror the language of this announcement. Read our federal resume guide first — it's the #1 reason qualified people get screened out.
Don't miss the next one.
Get an email the moment a similar federal job opens — postings can close in as little as 5 days.